We will have to wait until 2018 for the release of the OnePlus 6, but this does not mean that we cannot imagine how the phone will look like. This is exactly what a YouTube channel named Concept Creator did.

A video posted on that channel presents a concept design for OnePlus 6. While this design is not the actual one, it is nice to have a point of reference. The entire video can be watched here.

Thin bezels and 6″ OLED Panel

The phone in the video has a sleek design with very thin bezels that manage to be thinner than the ones of the OnePlus 5T. The device appears to be made out of metal and it has the OnePlus logo on its back, colored in red.

If we continue to look at the back side, we can see that it also includes a dual camera setup that is vertically aligned. The back appears almost completely flat, which would be a change from the curved one that came with OnePlus 5T. We should also mention that the power / lock key also works as a fingerprint scanner.

On the right side of the phone there is a button designed for the camera, and the lock key while on the left side there are the volume up and volume down buttons, as well as the alert slide of the smartphone. At the bottom of the phone we can see two speaker grills and a Type-C USB port. There is no 3.5 mm headphone jack there, but there Is one at the top of the device.

We did not get too many technical details, except that it has 16 and 12-megapixel rear-facing camera, an f/1.6 apertures, a 6-inch QHD AMOLED panel, as well as OIS.